
Add to Cart
Low Intensity 100Lux LED Aviation Obstruction Light 220v Double Light
220v Double Light 100Lux Low Intensity Led Aviation obstruction Light
GS-LI/D Low-intensity Double Aviation Obstruction light, Base adopts metal stoving varnish.
Light source adopt with independent research and development dedicated LED chip, which have the specific of high light intensity ,low power consumption and long service life.
Lampshade adopt with PC material, it can resist corrosion, anti-UV, anti-shock; management circuit with Strong lightning protection and With the surge protection device, which can adopt to extremely bad working environment.
This lamp with photoswich, it can turn on when light intensity less than 50LUX, and turn off when above 50Lux.
Specification | |
FAA Classify: | L-810 |
Type: | GS-LI/D |
Operating Voltage: | AC 110V/220V, DC 12V/24V/48V |
Power Supply Frequency: | 50Hz~60Hz |
Average Power Consumption: | ≤3W |
Working Mode: | Steady burning, flashing, flashing alternately |
Light Intensity: | Type B ≥32.5cd Type A ≥10cd |
Horizontal Out-put: | 360° |
Vertical Divergence: | 10° |
Light Source service Life: | ≥20 years |
Emitting Color: | Red |
Overall Size: | 292mm×130mm×220mm |
Installation Size: | 100mm×M10×4 |
IP Protection: | IP67 |
Optical Ambient Brightness: | 50/100Lux |
Ambient Temperature: | -40℃~70℃ |
Weight: | 3kg |
Anti-Wind Ability: | 120m/s |
Features
1. Integrated reflective optical structure, more uniform luminescence;
2. Stainless steel baked with the lacquer base.
3. Special LED chips, with brightness, low power consumption and long life.
4. PC material cover, provides strong corrosion resistance, UV resistance, impact resistance.
5. With lightning protection ability and control circuit with anti surge protective device that can apply to poor working environment.
6. With light-operated switch. When under the condition of less than 50Lux light, it can automatically switch ON the light, and if it under the conditions of over 50Lux light, it can automatically switch OFF.
Attention/ Usage Tips
1. Check whether the supply voltage does comply with the rated voltage of device.
2. Do not open it if the device is out of operation, in order not to be hurt by the internal high pressure.
3. After finished the installation, the personnel must check whether the device is in a good waterproof processing and whether the screw spikes are tight
4. Non-professional workers can not do the device maintenance, in order not to expand the error and be hurt.
Application
Building
Airport
High Mastlamp
Chimney
Towers(Telecom, GSM, Electric)
Bridge
High-rise Buildings
Crane
Dimension drawing
Our factory
Our aging room
FAQ
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
A: Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than.
A: Low MOQ, 1pc for sample checking is available.
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
A: Yes, we offer 2-5 years warranty to our products.
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.